PK Glazing

Guide · Homeowners · 4 min read · Updated 17 November 2026

Replacement Windows and Building Regulations: What UK Homeowners Need

Short answer

Replacing windows and doors in England and Wales is controlled work under the Building Regulations. The new frames must meet energy efficiency standards, and safety glass, escape windows and ventilation must be addressed. The simplest route is to use an installer registered with a competent person scheme such as FENSA or Certass, who self-certifies the work and issues a compliance certificate you will need when you sell.

Replacement Windows and Building Regulations: What UK Homeowners Need

Why replacement windows need certifying

Since 2002, replacing a whole window or external door in England and Wales has counted as building work. The aim is to make sure the new installation is energy efficient, safe and does not make the home worse in other ways, for example by removing a fire escape route or reducing ventilation. Repairs such as replacing a sealed unit, a hinge or a lock are not controlled work.

There are two routes to compliance. Either you apply to the local authority building control before work starts and pay for an inspection, or you use an installer registered with a government-authorised competent person scheme, who can self-certify. Almost all homeowners use the second route because it costs nothing extra and the certificate arrives automatically.

Doors are treated the same way as windows when more than half of the door area is glazed, and fully glazed doors such as bifolds and patio doors are always controlled work. Solid front doors are generally included too, so a new composite door should also come with a compliance certificate from a registered installer.

The main rules that apply

Several parts of the Building Regulations touch on window and door replacement. The installer should cover these at the survey stage, and the quote should reflect any safety glass or escape opening requirements.

RequirementWhat it coversWhat it means in practice
Part L (energy)Thermal performanceWindows must meet a minimum U-value or energy rating
Part B (fire)Means of escapeEscape windows need 0.33m² clear opening, minimum 450mm
Part K (safety)Glazing in critical locationsSafety glass in and beside doors and below 800mm
Part F (ventilation)Background ventilationDo not reduce existing ventilation, e.g. trickle vents
Part M (access)AccessibilityDo not make an accessible entrance less accessible

Escape windows explained

Some rooms rely on a window as an emergency escape route, typically first-floor habitable rooms in houses where the stairs do not lead to a protected route out. A replacement window in such a room should provide at least the same escape opening as before. The guidance for an escape window is a clear openable area of at least 0.33 square metres, with a minimum width and height of 450mm, and the bottom of the opening generally no more than 1100mm above the floor.

Escape hinges, sometimes called easy-clean or fire escape hinges, open the sash wide to give the full clear opening. Your surveyor will identify rooms that need them. It is one of the most common things that goes wrong when windows are replaced without proper advice.

  • Clear openable area of at least 0.33 square metres
  • Minimum 450mm wide and 450mm high when open
  • Escape hinges or suitable opening style where needed
  • Restrictors must be releasable without a key in an emergency

FENSA, Certass and your compliance certificate

FENSA and Certass are the best-known competent person schemes for windows and doors. A registered installer notifies the scheme when the job is complete, and you receive a certificate confirming the work complies. The local authority is also notified. Keep the certificate with your property documents. Your solicitor will ask for it when you sell, and the buyer's solicitor will raise queries if it is missing.

If you have had windows fitted without a certificate, a regularisation application to building control may be possible, but it involves fees and an inspection, and some elements may need opening up. It is much easier to get the paperwork right first time by choosing a registered installer.

What your installer should handle for you

A competent installer takes responsibility for the technical side of compliance. At survey, they should identify each room's needs: escape openings in first-floor bedrooms, safety glass in doors and low-level panes, trickle vents where the old frames had them, and suitable frames for any accessible entrance. They should specify windows that meet the energy performance requirements and tell you if any opening has a structural issue, such as a failed lintel, that needs fixing before or during the work.

After fitting, the installer notifies the scheme, which issues your certificate, usually within a few weeks. If it does not arrive, chase the installer, because it is their responsibility to register the work. You should also receive warranty documents and basic care information. If your property is in Scotland, ask the installer how the work will be handled under the Scottish building standards system, since the process and paperwork differ from England and Wales.

  • Identifies escape, safety glass and ventilation needs at survey
  • Specifies windows that meet energy requirements
  • Flags structural issues such as failed lintels
  • Registers the work and arranges your certificate

Planning permission, listed buildings and flats

Building Regulations and planning permission are separate. Replacing windows on a house with ones of similar appearance is usually permitted development and needs no planning application. Listed buildings need listed building consent for most window changes, and conservation areas may have Article 4 directions that remove permitted development rights for front elevations.

Flats and maisonettes do not have the same permitted development rights as houses, and leaseholders usually need freeholder consent because windows often form part of the building structure. Scotland runs its own building standards system, and Wales has its own version of the Building Regulations, so the detail differs if your property is outside England.

Questions people also ask

Do I need building regulations approval to replace one window?

Yes. Replacing even a single whole window is controlled work in England and Wales. A registered installer can self-certify it. Replacing only the glass or the hardware does not need approval.

What happens if I do not have a FENSA certificate?

You may have problems when selling, as the buyer's solicitor will ask for evidence of compliance. You can apply to building control for regularisation, or some buyers accept indemnity insurance, but neither is as straightforward as having the certificate.

Do new windows have to have trickle vents?

Replacement windows should not reduce the ventilation the room had before. If the old windows had trickle vents, the new ones should too, and current guidance in England expects background ventilation to be provided in most cases.

Written and checked by the PK Glazing team. Read our editorial policy.

Get a free double glazing quote

Tell us what you need and we'll come back with a clear price.

Request a quote