PK Glazing

PK Glazing

Commercial Glazing

Glazing for offices, retail units, schools and multi-occupancy buildings: aluminium windows, curtain walling, glazed partitions, fire-rated doors and planned replacement programmes.

Free Double Glazing quote

No obligation. We only use your details to reply about this job.

Commercial Glazing — PK Glazing

What's involved

Commercial jobs carry different demands from domestic ones: larger spans, heavier glass, higher footfall and stricter rules on safety glazing, fire separation and accessibility. We arrange aluminium window replacements across whole buildings, glazed office partitions, automatic and manual entrance doors, and fire-rated glazed screens supplied with the test evidence the fire strategy requires. For landlords and managing agents we can phase work floor by floor or block by block so tenants stay in occupation. Each project starts with a site survey and a written schedule listing every opening, its size, glass specification and any access equipment needed, such as scaffolding, a tower or a mobile platform. Out-of-hours fitting can be arranged for shops and offices. You receive operation and maintenance information at handover so your facilities team knows how to adjust, clean and service what has been installed.

How we handle it

  1. Request a quote

    Tell us which windows or doors need replacing or repairing, the property type and rough sizes. Photos of each elevation help us give an accurate guide price before anyone visits.

  2. Survey and measure

    A surveyor visits to measure every opening, check the condition of brickwork, lintels and sills, note fire escape and safety glass requirements, and talk through styles, colours and hardware with you.

  3. Fixed written quote

    You receive an itemised quote showing each frame, the glass specification, finishes, fitting and disposal. Nothing is ordered until you are happy with the specification and the price.

  4. Manufacture

    Frames are made to the surveyed sizes. uPVC typically takes two to four weeks, aluminium and composite doors three to eight weeks. We confirm the fitting date once delivery is booked.

  5. Fitting and sign-off

    Fitters remove the old frames, install and seal the new ones, fit trims and clean up. They walk you through locks and adjustment, and the installation is registered for Building Regulations compliance.

Price guide

Window and door prices depend on the number of openings, their size, the frame material and the glass specification. The guide prices below are for supply and fitting, including removal and disposal of the old frames. Your survey confirms the final figure, which is fixed in writing before anything is ordered.

  • Composite front door, fitted: £1,200–£2,400. Includes frame, high-security cylinder and standard hardware. Side panels and toplights cost extra.
  • Aluminium casement window: £800–£1,600. Thermally broken, powder-coated. Price rises with size, dual colours and decorative glazing bars.
  • uPVC casement window (average size): £450–£900. White, A-rated double glazing, fitted. Foiled colours and woodgrain finishes add roughly 15 to 25 percent.

Questions about commercial glazing

Can misted double glazing be fixed without replacing the frame?

Yes. Misting means the seal around the sealed unit has failed and moisture has got between the panes. The frame is usually fine, so only the glass unit is replaced with a new one made to size. Each unit costs roughly £90–£250 and takes under an hour to swap once made.

Is triple glazing worth it in the UK?

For most UK homes, good A-rated double glazing with a warm-edge spacer gives most of the benefit at lower cost. Triple glazing makes more sense in exposed, cold locations, north-facing rooms, near busy roads where noise matters, or in well-insulated homes aiming for very low heat loss. It adds weight and cost.

Get a free double glazing quote

Tell us what you need and we'll come back with a clear price.

Request a quote